Engineered hardwood flooring pros and cons

Engineered hardwood flooring pros and cons

Engineered hardwood flooring pros and cons

Engineered Hardwood flooring is one of the most important design details of homes and offices. Although it offers many advantages, it can also have some disadvantages. In this article, we will cover all the details about hardwood flooring and share with you everything you need to know before hardwood flooring. Prepared as an excellent hardwood flooring guide, this content will tell you all the facts about engineered hardwood flooring in detail.

What is engineered hardwood flooring?

Narrow and long flooring obtained by processing oak, hornbeam and beech timbers on machines is a coating tool. They are ideal materials for use in hardwoods, floor coverings, and underfloor heating floors. Both solid and laminated applications with adhesive on the ground are possible. It should be accepted that the heat loss in the places where the floating system is applied in laminated hardwood applications will be greater than that of the bonding system laminated hardwood.

How is engineered hardwood flooring applied?

Hardwood flooring requires delicate work. It is of great importance to get professional support for this process. That is why hardwood flooring is handled gradually, accompanied by a certain sequence.

 – First of all, the place where the hardwood will be laid should be made smooth.

 – Then hardwood calculation should be made on the square centimeter in accordance with the area.

 – Then the hardwoods should be placed carefully at the relevant point.

 – Then the fixing work should be done with masking tape.

– After leaving this process for 48 hours, the assembly should be handled.

 In general, hardwood flooring is realized by completing these applications. Of course, it is a very delicate work and requires certain materials. Therefore, it is very important to get expert support.

Pros of engineered hardwood flooring

Hardwoods are often a complementary element of a house. Hardwood houses, which are very preferred especially because they are compatible with all kinds of furniture, are also extremely useful for hygiene addicts.

Hardwood is made of natural wood and is produced in the form of models of various shades. Thanks to the wide range of colors, you can choose from cherry, walnut, lapacho, pine or oak options depending on the style of your home and furniture.

In addition, hardwoods are durable types of flooring. Although they vary according to the type and quality of the hardwood, in general, they do not wear out easily, except for very hard impacts. However, with regular maintenance and simple precautions to be taken, you can prevent damage to your hardwood.

Although hardwood flooring is very good for homes, it is not very recommended to use it in offices or places where human circulation is intense. However, this opinion is not entirely correct. Durable hardwood models produced for outdoor or offices add beauty to the environment in which they are located.

Cleaning and maintenance of wooden and laminate floors is extremely simple. Hardwood cleaning does not require any extra expertise. You, too, can maintain the appearance of your hardwood on the first day for a long time by following simple recommendations. In addition, if regular maintenance is carried out, the color of hardwood floors does not fade for many years and remains the same as before.

Each of the hardwood floors has a different color tone and pattern. However, the materials used in these flooring types differ in their part. Hardwood prices are generally determined according to the quality and other characteristics of the material used. Nowadays, hardwood is preferred as a floor covering in home decoration. The reason for this is that houses with hardwood flooring look more aesthetic and this increases the value of the house. Whether it is a modern or classic decoration; hardwoods that adapt to every home decoration and style bring a lot of advantages for homeowners.

Perhaps the biggest disadvantage of hardwood floors is that they cost a little. The only reason for this is that the materials used are of high quality and have different properties such as anti-scratch and water resistant hardwood floor. For these reasons, hardwood flooring may not be a very suitable idea for those who have a low budget. Another disadvantage of hardwood floors is cleanliness. In summary, due to the wrong cleaning product choice, the hardwoods fade over time and lose their brightness.

Those who have such a problem can easily overcome this problem with polishing or other simple procedures.

In addition, sometimes walking on the hardwood with socks can cause you to be in danger of slipping. To overcome this problem, you can choose hardwood produced from hardwood raw materials such as oak.

In short, the advantages of hardwood flooring do not end with counting. But like any beautiful accessory, they also expect intense attention and care. In short, if the floor of your house is covered with hardwood, you can always make the place you step on look aesthetic with just a little care and effort.

Cons of engineered hardwood flooring

Engineered hardwood is a natural product, so it is very much affected by the humidity level in the house. As the humidity level increases, the surface area increases, as the surface area decreases, the surface area decreases. This situation causes unwanted gaps between the Flooring. Therefore, the life of the varnish is shortened. Since the water resistance of solid hardwood is close to the minimum, it causes high damage in possible household accidents. Since the engineered hardwood surface is used as polished, it is highly resistant to scratches. That's why it should be cleaned with special cleaners. Among the hardwood options, the highest price but the most difficult flooring to use is engineered hardwood. In order to eliminate the disadvantages of this hardwood, laminated hardwood, which is a slightly more industrial product, has begun to be produced.

Tips for engineered Hardwood Flooring

River sand must be used in the screed of the floor where the classical hardwood will be laid. Because sea sand retains moisture for a very long time due to the salt in its structure. This adversely affects dry hardwood. It is also imperative that the screed be polished with a steel trowel. If cement powder is not sprinkled on it, the screed may scorch. The humidity in the wooden hardwood should be at world standards (8-10 percent). If the screed has just been poured, it is necessary to wait two months to lay the hardwood. The two-month period is valid for the period of April-October when the weather is warm. This period is also suitable for the building with the heater on. However, if the heater is not on, it would be appropriate to leave the hardwood flooring at the end of winter.

The floor should be cleaned very well before flooring. No lime or mortar should remain. If mortar is mixed on the dried screed for any reason, hardwood should never be laid without waiting for the moisture formed in the screed to dry completely (this period is 1 month). The glue suitable for the described screed should be applied to an area of ​​one square meter with a comb sent by the company and the flooring should be done immediately. If the screed does not meet the mandatory requirements and is rough with a wooden trowel, it should be laid on the concrete floor after a viscous paste is obtained and a thin layer is obtained by mixing the special glue with the screed powder. 2-3 days after a thin layer is obtained by drawing with a gauge, glue should be applied to the completely hardened floor in the same way with a comb, and then hardwood flooring should be started. In another system, paving pitch can be made between concrete and hardwood for insulation purposes. After this bitumen has dried and hardened a bit, flooring can be done while it is hot. While the flooring processes in solid and hardwood hardwood are proceeding section by section, the sponge is wetted and squeezed thoroughly every half meter and wiped with this sponge so that the surface of the hardwood is moistened. After the flooring is finished, a thin layer of dry sawdust should be laid on the hardwood and the moisture of the glue should be removed, which will ensure that the hardwood sticks as a tarn. Before starting to lay the hardwoods, all windows must be installed, paint-whitewash and wallpaper works must be finished. Most importantly, it should be checked whether the heater and pipes are healthy. Use should be avoided for 4 days after the last coat of varnish has been applied.

How to choose hardwood flooring?

Each type of hardwood has its own advantages and disadvantages. However, among the types of hardwood that attract the heads of surface Flooring administrations, there is definitely a type suitable for every budget. Regardless of your choice between solid, laminated or laminate flooring, we recommend that you choose the highest quality class of the type you will receive. A quality laminate flooring will be a much more efficient and effective choice than a poor quality laminated hardwood.

Another thing is to work with people who are experts in their business. While competent people can make good results even with a poor quality material, it should be remembered that an inexperienced person may not be able to give the desired result even with the best material. Therefore, we recommend that you contact us.

error: Content is protected !!
All in one